Home / Support / Topic: Installation & Prep
Tags
- Cylinder Rotation
- Door Handing Process
- Reversible Handing
- Door Preparation
- Parts in a Box
- Electronic Locks
- Traditional Locks
- Door Warping
Answers
-
Answer Handing can be redone by removing the battery pack, holding the program button for 10 seconds then reinserting the battery pack and then pressing the program button again Read More -
Answer The iOS 10 native “Home App” will support locking your Premis lock at a certain time of day using the HomeKit Automation section of the App. The lock can also be set to auto-lock after a certain period of time after the last lock operation. This setting can be managed from within the Premis App under lock settings. Read More -
Answer Premis has a weather proof exterior, however, the interior must be protected from the elements. Read More -
Answer This is a feature to ensure door is always locked and the key is removed only in the locked position (vertical). Read More -
Answer These door locks are tested for use on an exterior house door, but not for gates, where both interior and exterior are exposed to the elements Read More -
Answer Make sure the door is open If you have not enabled a programming code, press and release the program button. You will hear two beeps. If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and the keypad will flash green. Press 8. You will hear one short beep and the keypad will flash green. Press Kwikset. Enter delay time between 1-99 seconds. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1. Read More -
-
-
Answer Yes, the handle can be adjusted for both the left and the right. Read More
Load More Answers
Interactive Guides
-
Interactive Guide This step-by-step guide will walk you through the process of installing Premis, ensuring proper performance, setup, and noting common issues. View Guide -
Interactive Guide This step-by-step guide will walk you through the process of installing Aura, ensuring proper performance, setup, and noting common issues. View Guide -
Interactive Guide This step-by-step guide will walk you through the process of installing Halo, ensuring proper performance, setup, and noting common issues. View Guide -
Interactive Guide This step-by-step guide will walk you through the process of installing Halo Touch, ensuring proper performance, setup, and noting common issues. View Guide
{{/each}}